HeatShield Chimney Cleaning in Salt Lake City, UT

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

HeatShield Chimney Cleaning in Salt Lake City, UT

We provide independent HeatShield service across Salt Lake City, from the Avenues to the near-west side. What makes our HeatShield work different here is the housing: century-old brick stacks, coal-era flues, and later gas inserts dropped into chimneys that were never sized for them. We inspect with a camera first, then tell you honestly whether HeatShield flue resurfacing fits your flue or whether a stainless reline is the safer call. One call covers sweep, repair, and inspection. Call (877) 404-8451 for a free estimate.

Call (877) 404-8451

Why Salt Lake City Residents Choose Us for HeatShield Service

HeatShield is a flue resurfacing system, so the result depends on the sweep who installs it, not on a dealer badge. We’re an independent HeatShield service provider, not affiliated with or authorized by the manufacturer. That independence is the point: we work with HeatShield regularly, we know the cast-in-place approach and where it holds up in Salt Lake City’s older masonry, and we’ll tell you when it isn’t the right answer.

Salt Lake City chimneys are not uniform. An Avenues brick home and a mid-century west-side duplex can need opposite fixes. Because we handle sweeping, crown and cap repair, insert work, and Level 2 inspection under one roof, nothing falls between contractors. Our technicians have up to 8 years of experience, and every visit ends with a written report and photos you can look at yourself. Scheduling is straightforward: you book a sweep, we arrive with the right materials for your flue. We answer 24/7.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common HeatShield Chimney Cleaning Problems We Solve in Salt Lake City

  • Cracked or spalling clay tile at the joints. This is exactly what HeatShield restoration is meant to seal, and it’s routine in Salt Lake City’s Avenues and east-bench brick homes where original clay flues have gone through decades of freeze-thaw. A liner poured over a stack that’s structurally unsound fails fast, so we confirm the masonry is sound before anything goes in.
  • Gas inserts and wood stoves in coal-era flues. Plenty of mid-century Westside and downtown Salt Lake City homes have a later appliance dropped into a flue that was never sized for it. That produces drafting problems and smoke backing into the room during inversion season. A HeatShield liner sized to the appliance, not the old flue, is the usual correction.
  • Missing or damaged caps packed with spring debris. Dust and cottonwood fluff collect in screens and crowns, then moisture works into the mortar around the liner. A restored flue can degrade from the top down if the cap and crown aren’t part of the job.
  • Unfinished retrofits at the top plate. Older downtown and west-side Salt Lake City masonry sometimes shows a past resurfacing where the crown seal or top plate was never finished, leaving a pathway for water and creosote right at the transition.
  • Heavy creosote from inversion-season burning. When the valley is socked in and wood burning is curtailed, stoves run hard in the cold months and creosote builds quickly. We sweep and then assess whether the flue surface needs restoration or just cleaning.

HeatShield Service in Salt Lake City: What Local Conditions Mean for Your Equipment

Salt Lake City sits in a bowl where winter inversions trap cold air and fine particulate under a Wasatch Front cap, and residential wood smoke from fireplaces and older stoves is a named contributor to that problem. That changes what a HeatShield liner actually does for you. A properly sized liner improves draft and burn efficiency, so the appliance burns cleaner and pushes less smoke back into the room on the days when the air is already trapped. In the Avenues and along the east bench, where 19th-century and early-20th-century brick homes still carry original clay-tile flues, a restoration that seals cracked joints is an air-quality fix as much as a safety one. On no-burn days, sweeps and relines spike, usually because smoke is backing into a room, not because someone remembered the annual chore.

HeatShield Models & Products We Service in Salt Lake City

We work with the HeatShield liner-restoration system as a whole: the cast-in-place refractory cement liner (the CerFIX Pro / CeCure system), the CeCure Sleeve for clay-tile relining, the hi-temp joint compound and mortar used in liner restoration, and the insulation mix for backfilling restored flues. HeatShield’s materials are proprietary, and mixing aftermarket refractory cement into the system compromises the seal, so we use the manufacturer’s own liner and joint compounds. Where a Salt Lake City flue is beyond saving, we say so and recommend a stainless reline rather than pouring a liner over failing clay. We’re an independent provider: we don’t claim to be a HeatShield dealer and we’re not factory-certified by them.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

HeatShield Service Pricing in Salt Lake City

Pricing for HeatShield work in Salt Lake City depends on flue length and diameter, how much of the clay can be salvaged, whether insulation backfill is needed, and how much crown and cap repair goes with it. A standard sweep and Level 2 inspection is one estimate; a full cast-in-place liner restoration is another. We don’t quote over the phone as if the chimney were standard. The free estimate includes a camera inspection and a photo report, the flat price is agreed before any work is booked, and the written estimate sets the final number. If the flue can safely wait, we’ll tell you that too.

Call (877) 404-8451 for an exact quote. Estimates are free.

Serving Salt Lake City, UT – Our Local Coverage Area

We serve Salt Lake City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – HeatShield Chimney Cleaning in Salt Lake City

Service Areas Near Salt Lake City

We also work in West Valley City, Emigration Canyon, West Jordan, and Granite. Each area has its own mix of flue types, so the inspection comes first and the recommendation follows. See our Salt Lake City page for more on local service.

Book Your HeatShield Service in Salt Lake City Today

If your fireplace is smoking back or your clay flue looks rough, we can take a look. Call (877) 404-8451. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and we’ll tell you what your HeatShield flue actually needs.

Written by the team at Chimney Sweep West Jordan.

Need Chimney Cleaning help in Salt Lake City? Licensed & insured · free written estimates
Call (877) 404-8451
Local Service Coverage

Request a Free Estimate in Salt Lake City

Tell us what you need - Chimney Sweep West Jordan responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7