Chimney Repair in Salt Lake City, UT | Chimney Sweep West Jordan

Chimney Repair in Salt Lake City - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Salt Lake City

If your fireplace is smoking back into the room, or you’ve noticed loose brick and crumbling mortar on the stack above your roofline, you’re in the right place. We handle chimney repair in Salt Lake City for the older brick homes that make up so much of this city, and we do it by showing you what’s actually wrong before anyone quotes a repair. Our technicians have up to 8 years of experience working on the kinds of flues and stacks you find here. Call (877) 404-8451 and we’ll get you scheduled.

Call (877) 404-8451

Why Salt Lake City Homeowners Call Chimney Sweep West Jordan for Chimney Repair

Salt Lake City has a lot of chimneys that were built for coal and later pressed into service for gas inserts and wood stoves, and that history is where most of the trouble starts. We work exclusively on chimneys – no roofing, no HVAC, no general handyman work – so every judgment call is made by someone who looks at flues and fireboxes every day. That focus matters when a stack has been modified more than once over the past century.

We work with the brands professionals trust: HeatShield and DuraFlex for relining and restoration, Gelco and Copperfield for the accessory-level details that keep a chimney system sealed and venting correctly. If a liner needs to come out or a crown needs rebuilding, we’re working with materials meant for the job, not hardware-store substitutes.

Every visit starts as a safety diagnostic. We inspect, we run a camera, and we show you the footage. Nothing gets recommended that you can’t see for yourself, and we’ll tell you plainly when a repair can safely wait. One call covers the sweep, the repair, and the inspection, so you’re not stuck coordinating between contractors who each blame the other for a draft problem.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Flashing Repair in Salt Lake City

Chimney Flashing Repair in Salt Lake City usually comes down to the freeze-thaw cycle: water gets behind the metal where the stack meets the roof, freezes overnight, and works the seal loose a little more each winter. When flashing pulls away, water runs straight down into the attic framing and the masonry instead of shedding off the roof. A typical flashing repair here runs $250 to $550, depending on how much of the existing flashing can be reused and how steep the roof pitch is. If you see staining on the ceiling near the chimney after a storm, get it looked at before the next freeze.

What We Look For at the Roof Line

We check the step flashing, the counter-flashing set into the mortar joints, and the sealant at the base. Lifted or rusted metal, gaps at the masonry, and water tracks on the sheathing all point to the same problem. We fix the flashing and re-seal the joint rather than smearing caulk over a failure that will reopen.

When Water Gets Behind the Brick

Flashing that’s failed long enough lets water soak the masonry, and that shows up as spalling brick and crumbling mortar lower down the stack. Catching it at the flashing stage keeps the repair small. Left alone, it turns into a masonry job.

Chimney Crown Repair in Salt Lake City

Chimney Crown Repair in Salt Lake City addresses the concrete cap on top of the stack, and it’s one of the most overlooked causes of water damage in older homes here. The crown sheds rain away from the flue, and when it cracks, water runs down inside the chimney instead of off the sides. A crown repair or rebuild typically runs $350 to $900 depending on the size of the stack and whether we’re patching or pouring a new crown with a proper overhang. Catching a hairline crack early is far cheaper than replacing a waterlogged flue liner later.

Cracks, Spalling, and Missing Overhang

A crown with no overhang lets water run down the face of the brick. We look for cracks wider than a hairline, concrete that’s flaking off, and a cap that was poured flush with the flue instead of sloping away from it. Any of those means water is getting in.

Rebuilding Rather Than Patching

When the crown is crumbling badly or the top courses of brick have spalled, patching won’t hold. Rebuilding the crown and the top of the stack with a proper slope gives the chimney a real roof again. We’ll show you which option your chimney actually needs.

Trusted Brands We Service in Salt Lake City

We work with a curated roster of professional-grade chimney brands: DuraFlex and HeatShield for liner systems and restoration, Gelco and Copperfield for caps, flashing, and venting accessories. These are the same materials CSIA-trained technicians use nationwide, and knowing how each one is specified and installed is part of the job. We don’t stock parts or keep a warehouse – we spec the right product for your flue and arrange it, which means fast turnaround on the repair once we’ve agreed on the plan. The right liner, installed right, is the whole point.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Salt Lake City Homes

  • Cracked or missing clay-tile flue liners. The 19th- and early-20th-century brick homes across the city often still have their original clay-tile liner, and those tiles crack under heat cycling. A cracked liner lets heat and creosote reach the framing, which is a fire risk, not a cosmetic issue.
  • Inserts and stoves dropped into flues never sized for them. It’s common in Salt Lake City’s older homes to find a gas insert or wood stove vented into a coal-era flue that was never lined or is undersized for the appliance. The symptom is poor draft and smoke rolling back into the room, especially on cold days.
  • Spalling mortar and loose brick from freeze-thaw winters. Water gets into the joints, freezes, and pops the mortar loose, and canyon winds drive rain against the stack from the side. Repointing and tuckpointing keep the masonry sound before the damage spreads.
  • Failed crowns and flashing on aging brick. A cracked crown or lifted flashing lets water into the stack every time it rains or snows. Combined with the city’s hard winters, small roof-line leaks turn into liner and masonry damage fast.

Pricing for Chimney Repair in Salt Lake City, UT

Repair pricing here reflects the age of the housing stock. Mortar repointing typically runs $400 to $1,200 depending on how many square feet of joint need doing. Chimney waterproofing runs $300 to $650. Crown repair, as noted above, sits in the $350 to $900 range, and flashing repair in the $250 to $550 range. A full rebuild of a badly deteriorated stack is a larger job and gets priced per the written estimate after we’ve seen the chimney. What moves the number is access, height, how much masonry has spalled, and whether relining is needed. The estimate is free and the written proposal sets the final price – the ranges above are typical, not a quote.

We Also Serve Cities Near Salt Lake City

We work throughout the Salt Lake Valley, including West Valley City, Emigration Canyon, West Jordan, and Granite. If you’re just outside Salt Lake City and your chimney needs repair, call and we’ll confirm coverage. You can also read more about our chimney repair work and what a visit includes.

Serving Salt Lake City, UT – Our Local Coverage Area

We serve Salt Lake City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Salt Lake City

Why Salt Lake City Chooses Chimney Sweep West Jordan

We set the standard for chimney repair in Salt Lake City.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Salt Lake City

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Salt Lake City Customers Say

Trusted by homeowners across Salt Lake City and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Roger Barrett
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Michelle Padgett
★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Beatriz Vargas

Ready for Chimney Repair in Salt Lake City?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Salt Lake City.

(877) 404-8451

Request a Free Estimate in Salt Lake City

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7