Chimney Company in Granite - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (877) 404-8451

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Granite, UT

Chimney inspection in Granite starts with the same reality on almost every street tucked against Little Cottonwood Canyon: homes here burn wood hard and long, and the brush and pine duff around them stays tinder-dry most of the year. That combination is why we treat a Granite visit as a safety check first and a cleaning second. We specialize in chimney work only, so the same company handles your Chimney Sweep West Jordan service line, the sweep, the repair, and the inspection with a camera you can look at yourself. Our technicians have up to 8 years of experience. Call (877) 404-8451 for a free estimate.

Call (877) 404-8451

Why Granite Homes Are Different

Granite (84093) sits at the mouth of Little Cottonwood Canyon, where homes are terraced into steep, forested foothills between Sandy and the canyon proper. That geography shapes chimney work in ways flat valley subdivisions never see. Roofs are sloped and multi-level, chimneys are tall or offset, and access takes more care than parking beside a rambler off 1300 East.

The cold month stretch from November through March pushes steady wood burning, and Wasatch Front inversions trap smoke close to the ground, so a heavily used flue really shows. Many homes here are mid-to-late-20th-century single-family builds with masonry fireplaces, plus a lot of older wood stoves added for supplemental heat and scattered newer custom foothill builds with longer, more complex flue runs. What we routinely find in 84093 is pine and scrub oak cut from the canyon itself. Those fires build glazed creosote faster than the hardwood fires of the valley floor, and that creosote sits in flues venting within yards of dry oak brush. Snow load, steep grades, and wildfire fuel at the roofline all matter. If your HOA or your city’s building department has rules about chimney or vent work, ask before we book, and we’ll work around them.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Granite Services

Two jobs come up most often in Granite foothill homes, and both start with figuring out what your flue actually needs before anyone touches it.

Chimney Sweep in Granite

Sweeping a canyon-adjacent home means getting the creosote out before it glazes, and pulling the loose soot and ash that builds from those pine and scrub oak fires all winter. We work with professional tools and a rotating sweep head to clear the flue wall without gouging it, then we vacuum the firebox so your living room doesn’t pay for the job in dust. Steep roof sections and tall offsets mean we set up carefully rather than reaching over a ridge. What we find on the brush side of the county matters too: a spark off a dirty flue is a real fire risk where oak brush grows against the siding. Ask for Chimney Sweep in Granite and we’ll tell you honestly whether your flue is due.

Chimney Sweep in Granite

Chimney Repair in Granite

Repair in Granite tends toward water and freeze damage as much as open cracks: heavy snow sits on a crown, melts, refreezes, and slowly works masonry apart. We look at the crown, the mortar joints, the flashing, and the flue liner, because a chimney that looks fine from the driveway can be missing a chunk of its liner inside. When a flue needs relining, we work with HeatShield and DuraFlex, the same professional-grade materials used by chimney technicians nationwide, not big-box substitutes. Capping and venting details get attention too, since a proper cap keeps out rain, snow, and whatever nests in a quiet flue. To get that started, request Chimney Repair in Granite.

Chimney Repair in Granite
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (877) 404-8451

Chimney Inspection in Granite

Chimney inspection in Granite answers one question: is this flue safe to burn again next winter? Foothill homes here were built mid-to-late 20th century, many with masonry fireplaces and older wood stoves added later, and after a hard November-to-March burning season on canyon-cut pine and scrub oak, the creosote load inside those flues is what we’re looking for. We inspect with a camera, and you see the same picture we do. Since that’s our primary service area, we approach every visit as a safety diagnostic, not an upsell, and we’re glad to walk you through our full Chimney Inspection capabilities.

Chimney Flue Inspection

Signs you need it

You need a flue inspection if smoke rolls back into the room, the fire burns sluggishly, you smell a sharp creosote odor on warm days, or you’ve burned two or more seasons without a look inside.

What it costs in Granite

A chimney inspection in Granite typically runs $99-$250, with the lower end for a straightforward visual check and the upper end for camera work on taller or offset foothill flues.

How we do it

We run a camera down the flue, check the liner, joints, and any offsets for gaps or glazed creosote, verify draft, and photograph anything that needs attention so you can see the evidence yourself.

Level 2 Chimney Inspection

Signs you need it

A Level 2 inspection is the one to book when you’ve added a wood stove or insert, changed the fuel type, had a chimney fire, or bought a home in Granite you haven’t personally burned in yet.

What it costs in Granite

Typical cost for a Level 2 chimney inspection in Granite falls between $150 and $350, and taller or more complex flue runs on sloped foothill roofs land toward the higher end.

How we do it

We inspect every accessible part of the system, including the firebox, damper, flue, crown, and visible exterior, using camera video and photos, then give you a written picture of condition before recommending a thing.

What Chimney Inspection Costs in Granite

Item Typical range in Granite
Standard chimney inspection $99 – $250
Level 2 chimney inspection $150 – $350
Camera-assisted flue evaluation $175 – $325

How often should a Granite chimney be inspected?

Once a year is the standard, and homes burning pine or scrub oak steadily from November through March should hold to it, since that fuel builds creosote faster than hardwood. Call (877) 404-8451 for an exact quote, estimates are free.

Can you inspect a chimney on a steep foothill roof?

Yes. Sloped, multi-level, and offset chimneys are common in Granite, and we plan access for the pitch rather than reaching from a ladder. Camera work lets us see the flue without standing on the steepest sections. Call (877) 404-8451 to book.

Brands We Service in Granite

We work with a curated roster of professional-grade brands, and for Granite homes that usually means DuraFlex or HeatShield for relining and Copperfield for caps and venting details. We don’t claim to stock parts locally; we order what your job needs. Turnaround depends on the material, and we’ll tell you the timing up front. You can see the full list on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Granite, UT

Every price below is a typical range for the work, not a final number. The written estimate sets the price, and we give it before we book.

Service Typical range in Granite
Chimney inspection $99 – $250
Level 2 chimney inspection $150 – $350
Camera-assisted flue evaluation $175 – $325

In Granite, price climbs with access: a tall offset flue on a sloped roof takes longer to reach and inspect than a straight one on a level lot, and heavy glazed creosote takes more time to clear. You’ll know the figure in writing before any work starts.

Neighborhoods We Serve in Granite

We work the foothill streets of 84093 and the canyon-adjacent roads where Granite homes are tucked between Sandy and Little Cottonwood Canyon. Booking is by appointment, and we’ll give you a window when you call rather than leaving it vague. The neighborhoods below reflect where homeowners reach out most.

  • Foothill streets along the Little Cottonwood Canyon approach
  • Hillside lots above the canyon mouth in 84093
  • Older single-family blocks with masonry fireplaces
  • Custom foothill builds with taller, offset flue runs
  • Canyon-adjacent homes with oak brush at the roofline

Service Area – Cities Near Granite

Granite sits between the canyon and the valley, and we cover the surrounding communities as well. If you’re just down the hill, we handle West Jordan, UT and Salt Lake City, UT. North of the canyon mouth is West Valley City, UT, and up the canyon road we serve Emigration Canyon, UT. Call (877) 404-8451. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.

Serving Granite, UT – Our Local Coverage Area

We serve Granite and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Granite

Ready to get started? Free estimates in Granite
Call (877) 404-8451

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Granite Customers Say

★★★★★ 4.9 from 8+ reviews

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Roger Barrett

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Michelle Padgett

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Beatriz Vargas

How It Works in Granite

Getting your chimney cleaning handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Granite. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7