Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in West Jordan?
Chimney cap installation in West Jordan typically costs $185 to $520, and a chimney crown rebuild usually runs $475 to $1,450. A straightforward cap-and-crown package on a single-flue masonry chimney most often lands between $650 and $1,600. Those figures cover materials and labor on a typical Wasatch Front home; the written estimate you get on site is what sets the final price.
Caps and crowns are the two parts of your chimney that take the most weather with the least protection, so it makes sense that they wear first. A cap keeps rain, birds, and debris out of the flue. The crown is the sloped concrete top that sheds water away from the brick and mortar below it. When either one fails, water gets in, and water is what drives most of the expensive chimney repairs we see in West Jordan.
Key Takeaways
- Caps run about $185 to $520 installed, depending on material, size, and whether it’s a stock or custom fit.
- Crown rebuilds run about $475 to $1,450. Small cracks can often be sealed for less than a full rebuild.
- Most single-flue homes come in between $650 and $1,600 for both together.
- West Jordan’s freeze-thaw swings are the main reason crowns crack here, not age alone.
- Estimates are free, and we tell you what the chimney actually needs before quoting a repair.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the line items break down for the West Jordan market this year. These are typical ranges for standard residential chimneys. Custom shapes, oversized flues, or a badly damaged crown that needs structural rebuild will push toward the top of these numbers or above them.
| Item | Typical Range | What It Covers |
|---|---|---|
| Stock stainless or galvanized cap | $185 – $340 | Single-flue cap, mesh spark screen, mounting brackets, installation |
| Custom or multi-flue cap | $320 – $520 | Fabricated to fit an odd flue size or a chimney with two or more flues |
| Cap with animal guard upgrade | $240 – $420 | Heavier mesh that keeps birds, squirrels, and raccoons out of the flue |
| Crown crack sealing | $185 – $425 | Cleaning, filling, and sealing hairline to moderate cracks in the existing crown |
| Full crown rebuild (standard) | $475 – $950 | Removing the old crown, forming a new sloped crown with proper overhang, curing |
| Full crown rebuild (oversized or damaged flue top) | $850 – $1,450 | Rebuild plus brick or mortar repair at the top of the stack |
| Cap and crown together | $650 – $1,600 | Most complete single-flue jobs, materials and labor included |
What pushes the price up? Multi-flue chimneys, because a cap has to span more openings and the crown has more surface to form. Non-standard flue sizes, because the cap is fabricated rather than pulled off a shelf. And the condition of the brickwork just below the crown: a crown doesn’t sit on nothing, and if the top courses of brick are spalling or the mortar joints have opened up, that gets addressed before a new crown goes on. What keeps the price down? Catching cracks while they’re still hairline, sticking with a standard-size stock cap, and getting the work done before winter water gets in and freezes.
We work with materials like Famco and Copperfield caps and the sealants and crown mixes that hold up in this climate. A cap that fits properly and a crown that sheds water are small jobs compared to what a rotted chase or a rebuilt flue costs later.
What Affects Chimney Cap & Crown Pricing in West Jordan
Pricing here isn’t just about square inches of concrete and metal. Local conditions and the shape of your particular chimney move the number more than most homeowners expect.
- Freeze-thaw cycles along the Wasatch Front. West Jordan sits in a valley that swings between warm afternoons and hard overnight freezes through much of the winter. Water gets into a hairline crown crack during the day, freezes at night, expands, and widens the crack. That cycle is the single biggest reason crowns fail here, and it’s also why sealing early is cheaper than rebuilding later.
- Chimney height and roof pitch. A tall stack on a steep roof takes more setup and more careful work at height than a short chimney on a low pitch. That labor difference shows up in the quote.
- Number of flues. A furnace flue and a fireplace flue side by side need a cap that covers both, and the crown spans a wider footprint. Multi-flue jobs run higher, but they’re also where a proper single cap saves the most trouble.
- Cap material. Galvanized steel is the budget option and will eventually rust. Stainless steel and copper cost more up front and last far longer. Given how much moisture a West Jordan roof sees between snowmelt and spring rain, we usually steer homeowners toward stainless or copper.
- Crown shape and overhang. A proper crown has a slope and an overhang that throws water past the brick face. A flat crown poured flush with the brick sheds water straight down the masonry. Rebuilding with the right profile costs a little more and lasts a lot longer.
- Condition found during inspection. If a crown job turns up a cracked flue tile or a failing liner, that gets flagged and priced separately. We don’t fold surprise repairs into a cap quote to make the number look bigger.
How to Save on Chimney Cap & Crown
The cheapest chimney crown is the one you seal before it cracks through. Beyond that, a few practical moves keep the bill reasonable without cutting corners on what actually protects the chimney.
- Seal cracks while they’re small. Crack sealing runs $185 to $425. A full rebuild runs $475 to $1,450. Catching the problem a season early often means the lower number.
- Bundle the cap with the crown work. When the crown is already being rebuilt, adding a cap is a small increment rather than a separate visit. Doing both in one trip is the most cost-effective way to protect the top of the chimney.
- Choose stainless over galvanized. It costs more now and outlasts the cheaper cap by years in a climate with this much snowmelt and rain. Replacing a rusted-out cap in a few seasons isn’t a saving.
- Get the inspection first. A chimney sweep West Jordan visit that includes an inspection tells you whether you need a crown rebuild, a seal, or just a cap. Guessing at the scope is how homeowners overpay.
- Ask for a written estimate before any work starts. Ours are free, and the written number is what you pay. No surprises added at the end.
If you’re not sure whether your crown needs sealing or rebuilding, call us at (877) 404-8451. We’ll look at it and tell you straight. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace: What’s Actually Cheaper?
Sealing is cheaper when the crown is cracked but still sound and attached. Rebuilding is cheaper over time once the crown is crumbling, separated from the flue, or holding water against the brick. A crown that’s lost its slope or its overhang won’t be fixed by sealant; the water will find a new path. The honest answer depends on what the crown looks like up close, which is why we inspect before quoting.
The same logic applies to the cap. A cap that’s dented but structurally fine can sometimes be re-secured. A cap that’s rusted through or sized wrong for the flue is money spent better on a proper replacement. The right cap, fitted right, is what keeps rain and animals out of the flue for the life of the chimney.
Why Crowns Fail Faster in West Jordan
This valley’s weather is hard on concrete and mortar. Winters bring repeated freeze-thaw cycles, and spring snowmelt sends water running down the roof and against the chimney. A crown that was poured flat, or one that’s developed a hairline crack, gives that water a way in. Once it’s inside the masonry, it freezes, expands, and pushes the brick apart from within. That’s why we look at crowns as a water-management problem first and a concrete problem second. The fix isn’t just a new slab on top; it’s a crown with the right slope and overhang so water leaves the chimney instead of soaking into it.
Homes in West Jordan with older masonry chimneys tend to show this first at the crown, since it’s the most exposed surface on the whole structure. If your chimney is brick and has been through a few winters without a cap, it’s worth a look. Our technicians have up to 8 years of experience reading exactly this kind of wear, and the inspection is a safety diagnostic, not a sales pitch.
What a Cap and Crown Visit Involves
We start with an inspection of the crown, the flue, and the brick at the top of the stack. If the crown is sound with minor cracks, we clean and seal. If it’s failing, we remove it, form a new sloped crown with proper overhang, and let it cure correctly. The cap goes on last, sized to the flue and secured so wind and snow load won’t shift it. For homes in the broader West Jordan area, one call covers the sweep, the repair, and the inspection, so there’s no coordinating between a cleaner and a mason. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield materials, the same professional-grade products used across the trade.
Because we specialize in chimneys only, the judgment call about whether to seal or rebuild comes from someone who does this every day, not a general handyman fitting it in between other jobs. Your fireplace is a heating appliance, and the cap and crown are what keep it dry and safe to use.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in West Jordan?
A chimney cap in West Jordan typically costs $185 to $520 installed, with most single-flue stock caps landing around $185 to $340 and custom or multi-flue caps running $320 to $520. Material matters: stainless and copper cost more than galvanized and last longer. Call (877) 404-8451 for an exact quote. Estimates are free.
How much does it cost to rebuild a chimney crown?
A full crown rebuild usually costs $475 to $1,450, depending on the size of the chimney and whether the brick at the top needs repair. Sealing minor cracks costs less, about $185 to $425. We’ll tell you which one your crown actually needs. Call (877) 404-8451 for a free estimate.
Can you fix a cracked chimney crown, or does it need to be replaced?
Hairline to moderate cracks can often be sealed for $185 to $425, while a crown that’s crumbling, separated, or holding water needs a rebuild at $475 to $1,450. A crown that’s lost its slope won’t be saved by sealant. We inspect first and quote the honest fix. Call (877) 404-8451 to book a look.
Is a chimney cap worth the money?
Yes. A cap at $185 to $340 prevents the water and animal damage that costs far more to repair, and it’s the cheapest protection you can add to a chimney. A cap and crown done together usually comes in between $650 and $1,600 on a standard single-flue home. Call (877) 404-8451 for a free estimate.
Can you come today to look at my chimney cap or crown?
Often, yes. Same-day service is available, and our estimates are free. We answer 24/7; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (877) 404-8451.
Get a Straight Answer on Your Chimney Cap or Crown
The cap and crown are the parts of your chimney that protect everything below them, and they’re among the least expensive repairs to get right when you catch them early. If you’re not sure whether yours needs a seal, a rebuild, or just a new cap, we’ll come look and tell you what the chimney actually needs. Estimates are free, pricing is upfront and set per job by the written estimate, and we’re licensed and insured. Call (877) 404-8451. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the West Jordan market as of 2026. Chimney Sweep West Jordan offers free estimates – call (877) 404-8451.
Written by the team at Chimney Sweep West Jordan.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Roger Barrett"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Michelle Padgett"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Beatriz Vargas